Central Locking Casters Cast Iron Core Caster Wheels for Workshop Equipment Rotating Support with Central Hole Stamped Galvanized Sheet Metal

For the?wheelchair front wheel casters?There are have three types: solid wheelchair wheels, inflatable wheelchair tyre and tubeless wheelchair tyres

The solid wheelchair wheels walks faster on flat ground,it’s won’t air leak and not easy to push, but it vibrates greatly on uneven road, and it is not easy to pull out when it is stuck in the ditch with the same width as the tire.

The inflatable wheelchair tyre with inflatable inner tube is difficult to push and also easy to puncture, but the vibration is smaller than the solid type comfortable to sit up.

The tubeless wheelchair tyres without inner tube even if punctured the tyre will not leak air quickly. And the inner part is also inflated and comfortable to sit up, but it is more difficult to push than the solid type.

We provide many size of?wheelchair wheels?assembly and wheelchair rear wheels.

For wheelchair front caster wheels,we have ?125mm,?150mm,?178mm,?200mm,?245mm wheel,all of these are PU foamed wheels which can match nylon or aluminum fork. For the mount top we use match M12 x 25 thread for nylon fork,and M12 x 65 bolt for aluminum fork mount top.

About the wheelchair rear wheels, we have 20??,22?? and 24?? three size.According to clients demand.

* For Wheel hub we can match Nylon wheel hub or Steel wire hub.

* For Wheel hand rim we can match aluminum rim,plastic rim,and steel rim

* For tire both solid PU wheel and Pneumatic wheel are available

Beside of this we also can help match quick release pin. With us we can provide one stop shop.